Wire Mesh Machine for Welder

The design of JIAKE European welding system realizes the feasibility of high-efficiency welding. The characteristics of this welding technology are
The welding voltage is stable and the welding grid is flat and firm.
A large number of high-performance modules are available for customers to upgrade their production lines to meet their different needs.
It has low investment cost, convenient operation and maintenance, and saves human resources.

wire-mesh-machine-for-welder

Machine Specification:

Model DP-FP-2500A DP-FP-2500A+ DP-GW-2500A
Wire diameter 3-6mm 3-8mm 5-12mm
Line wire pitch 50-300mm 100-300mm 100-300mm
Cross wire pitch Min.25mm/12.7mm Min.50mm Min.50mm
Mesh length Max.6m Max.12m Max.12m
Mesh width Max.2500mm/Max.3000mm
Welding torch Max.48/61pcs Max.24/30pcs Max.24/30pcs
Welding transformer 150kva*6/8pcs 150kva*6/8pcs 150kva*12/15pcs
Welding speed Max.80 times/min Max.75 times/min Max.65 times/min
Weight 5.2T 6.2T 8.5T
Machine size 5.4*3.4*1.6m 16*3.9*1.6m 20*5.5*2.1m

We can design the reinforcing mesh welding machine according to your wire diameter, mesh hole size and mesh width.

High performance module (required):

wire-straightening-and-cutting-machine

Lines and cross lines are Straighten and cut. depending on Market development, this factory Can also be modified for the production of Feed wire from spool or coil By adding necessary supplement equipment.

The optional models of the straightening machine are GT3-6H, GT3-8H, and GT5-12 high-speed series.

Line-wire-feeding-system

Line wire feeding system

The wire mesh machine for welder line wire feeding system manually inserts the pre-straightened and cut steel bars into the feeding trolley.
Features:

  • Panasonic servo motor + planetary reducer to send warp wire
  • SMC cylinder tightening device can adapt to different wire diameters
crosswire-feeding-system

Crosswire feeding system

Crosswire feeding system stores pre-straightened and cut steel bar.
Features:

  • Stepper motor/servo motor sucks a handful of wire at a time and weighs 1T.
  • 3-8mm Stepper motor controls wire doffing/5-12mm Panasonic servo motor + planetary reducer controls wire doffing
wire-mesh-welding

Wire mesh welding system

The welding system adopts European welding technology, a water-cooled cylinder, and one cylinder controls one welding spot.
Features:

  • The upper copper arm connects two welding heads to form a complete circuit.
  • The lower copper bar connects the lower welding head and water-cooled transformer.
  • Water-cooled transformer, one transformer controls 4 welding heads.
mesh-pulling-system

Mesh Pulling system

The panasonic servo motor controls the net pulling, the SMC cylinder controls the hook up and down, and the net pulling distance is set by the touch screen.

Wire material:

• Cold-rolled wire, plain or ribbed
• Hot-rolled ribbed wire with inline heat treatment, Tempcore (cooling and tempering process, directly after
rolling)
• Hot-rolled wire, micro-alloyed, ribbed
• Hot-rolled and subsequently stretched wire ribbed

Contact Info:

Hebei Jiake Welding Equipment Co.,Ltd

Add: Wire Mesh Industrial Zone, Anping, Hebei, China
Contact person: Bruce Ma
Position: Sales Director
Skype/WeChat: dapumachine
Mobile/WhatsApp: +86-15930181601
Email: info@jiakemeshmachine.com